1100013 Tapered Roller Bearing for Caterpillar

1100013 is a tapered roller bearing used in equipment manufactured by Caterpillar. The bearing is used in Caterpillar backhoe loaders, track-type tractors, and engine-machine applications, including the equipment models and engine designations listed below. This is a new aftermarket spare part manufactured by CTP (Costex Tractor Parts).

The part name in the supplied Caterpillar application data is BRG, TAP RLR. Its construction is identified as a tapered roller bearing, intended for installation in the corresponding bearing position of compatible Caterpillar equipment. The available application information does not specify the exact assembly location on each machine model, so the installation position should be confirmed against the parts manual for the relevant machine serial number.

Fitment

• Caterpillar 416B backhoe loader
• Caterpillar 426B backhoe loader
• Caterpillar 428B backhoe loader
• Caterpillar 432F backhoe loader
• Caterpillar 436B backhoe loader
• Caterpillar 438B backhoe loader
• Caterpillar D10T track-type tractor
• Caterpillar D11R track-type tractor
• Caterpillar D11T track-type tractor
• Caterpillar 3054 engine-machine application
• Caterpillar C32 engine-machine application

The supplied fitment data identifies the part for Caterpillar backhoe loaders, track-type tractors, and engine-machine applications. Model compatibility can vary by production configuration and serial-number range; the model designation alone may not identify every applicable machine configuration.

For backhoe loader applications, the listed models are 416B, 426B, 428B, 432F, 436B, and 438B. For track-type tractor applications, the listed models are D10T, D11R, and D11T. The 3054 and C32 entries are provided as Caterpillar engine-machine applications rather than as backhoe loader or track-type tractor model designations.

Cross-reference numbers

• 110-0013
• 1100013

1100013 is the SKU format supplied for this bearing. The same number is also written as 110-0013 with a separator. Both number formats refer to the bearing identified in the supplied application data. No additional supplier or equipment-manufacturer reference numbers are provided.

Specifications

The stated dimensions are 5.8 cm in length, 4.9 cm in width, and 6.1 cm in depth. The stated weight is 0.4 lb. No information is provided for bore diameter, outside diameter, bearing width, roller material, cage material, static load rating, dynamic load rating, or the quantity supplied. These parameters are therefore not specified for this listing.