175-70-21136 End Bit RH for Komatsu

The 175-70-21136 is a right-hand end bit for blades used on Komatsu construction equipment. It is listed for Komatsu bulldozers, pipelayers, and wheel dozers, including the equipment models and machine applications specified below. This is a new aftermarket spare part manufactured by CTP (Costex Tractor Parts).

The part is identified by SKU 175-70-21136 and is intended for installation in the right-hand end position of the applicable blade assembly. The supplied fitment data identifies the machine series and application versions where this end bit is used.

Fitment

• Equipment manufacturer: Komatsu
• Equipment type: Bulldozers
• Bulldozer models: D135A, D150A, D155A, D155AX, D155W
• Equipment type: Pipelayers
• Pipelayer model: D355C
• Equipment type: Wheel dozers
• Wheel dozer model: WD600

The listed application references identify the following Komatsu machine versions:

• D155A-1
• D155AX-5
• D155AX-6
• D155AX-7

Fitment should be checked by comparing the machine model, series designation, and existing part number before installation. The supplied data lists the part for one position per machine.

Specifications

Installation hardware references

The fitment information specifies the following hardware numbers for the installation of the 175-70-21136 end bit. These numbers identify the associated bolt, nut, and washer; the available data does not state that the hardware is included with the end bit.

Before fitting the part, verify the right-hand blade position and confirm that the retaining hardware corresponds to the listed bolt, nut, and washer numbers. The quantity reference is one end bit per machine.