2368158 Brg-sleeve fit Caterpillar
2368158 Brg-sleeve fit Caterpillar
- New aftermarket part
- 30 day returns
- Manufacturer's warranty
2368158 Sleeve Bearing for Caterpillar Equipment
2368158 is a straight sleeve bearing for Caterpillar backhoe loaders. This is a new aftermarket spare part manufactured by CTP (Costex Tractor Parts).
The part is classified as a dimpled and milling bearing. The supplied data identifies it as a steel sleeve with cross holes, without an outer groove and without an inner groove. Dimensions are provided in both inch and metric units where available.
Fitment
- Equipment brand: Caterpillar
- Equipment type: Backhoe loader
- Compatible models: 426C, 430, 430D, 430E, 430F, 430F2, 436C, 442E, 444E
Cross-reference numbers
- 2368158
- 236-8158
Specifications
| Part type | Straight sleeve bearing |
| Equipment manufacturer | Caterpillar |
| Category | Dimpled and milling bearings |
| Material | Steel |
| Cross holes | Yes |
| Outer groove | No |
| Inner groove | No |
| Inner diameter | 2.37 in |
| Outer diameter | 2.92 in |
| Overall length | 1.89 in |
| Weight | 1.2 lb |
| Length | 7 cm |
| Width | 6 cm |
| Depth | 7.2 cm |
Part identification
The sleeve is identified by SKU 2368158 and by the hyphenated number 236-8158. Both number formats refer to the same listed part reference. The dimensional data describes the internal diameter, external diameter and total sleeve length; the inch values are the specified bearing dimensions, while the centimetre values are the recorded package or part dimensions provided in the source data.
Before installation, compare the part number, equipment model and measured dimensions with the component being replaced. The fitment information applies to the Caterpillar backhoe loader models listed above.
Questions 2368158 Brg-sleeve fit Caterpillar 0 questions