7K5192 Straight Sleeve Bearings fit Caterpillar
7K5192 Straight Sleeve Bearings fit Caterpillar
- New aftermarket part
- 30 day returns
- Manufacturer's warranty
7K5192 Straight Sleeve Bearings Fit Caterpillar
The 7K5192 is a straight sleeve bearing for rotational movement between Caterpillar machine frames, linkages, and work tools. It is a new aftermarket spare part manufactured by CTP (Costex Tractor Parts).
This bearing is used in linkage and connection points on selected Caterpillar skidder models. The part has a plain cylindrical sleeve design without inner or outer grooves and without radial or cross holes.
Fitment
- Caterpillar 515 skidder
- Caterpillar 518 skidder
- Caterpillar 518C skidder
- Caterpillar 525 skidder
- Caterpillar 525B skidder
- Caterpillar 535B skidder
- Caterpillar FB518 skidder
Fitment is listed for the Caterpillar skidder models above. Compatibility should be checked against the machine model, serial number, and the dimensions of the bearing location before installation.
Cross-reference numbers
| Part number | 7K5192 |
| Alternate number format | 7K-5192 |
| Number type | Caterpillar equipment part number format |
The numbers 7K5192 and 7K-5192 identify the same bearing reference with different formatting. The SKU for this product is 7K5192.
Specifications
| Part type | Straight sleeve bearing |
| Application | Machine linkage, frame, linkage, and work-tool connection points |
| Equipment manufacturer | Caterpillar |
| Material | Steel |
| Inner diameter | 2.25 in |
| Outer diameter | 3.25 in |
| Overall length | 0.88 in |
| Inner groove | No |
| Outer groove | No |
| Radial holes | No |
| Cross holes | No |
| Listed weight | 1.2 lb |
| Listed length | 9.3 cm |
| Listed width | 4 cm |
| Listed depth | 9.3 cm |
The bearing is supplied as a straight sleeve bearing identified by SKU 7K5192. Its cylindrical form provides the bearing surface for the corresponding pin or shaft in the Caterpillar machine linkage assembly. The listed bore diameter is 2.25 inches, and the listed outside diameter is 3.25 inches. These dimensions define the main bearing interfaces and should be compared with the removed part and the mating components.
The part has no inner groove, outer groove, radial holes, or cross holes according to the available specifications. The stated material is steel. No additional components, seals, retaining rings, pins, or installation hardware are specified as included with this bearing.
Questions 7K5192 Straight Sleeve Bearings fit Caterpillar 0 questions