9K2514 Straight Sleeve Bearing for Caterpillar Equipment

The 9K2514 is a straight sleeve bearing used in Caterpillar equipment. It is a new aftermarket spare part manufactured by CTP (Costex Tractor Parts).

The bearing is identified as a straight sleeve type and is supplied with a steel construction. The available product data specifies a plain design without an inner groove, outer groove, or cross holes. The dimensions and additional physical data are provided below for part identification and compatibility checks.

Fitment

This straight sleeve bearing is listed for the following Caterpillar machine models:

• 834B Wheel Bulldozer
• 988B Wheel-Type Loader

Fitment is stated for the models listed above under part number 9K-2514. The machine model and the bearing dimensions should be checked before installation where multiple bearing locations or configurations are present.

Cross-reference numbers

Specifications

The dimensional data for the bearing body consists of a 1.51-inch inner diameter, a 1.76-inch outer diameter, and a 2-inch overall length. The inner and outer surfaces are listed without grooves, and the part has no cross holes. These design details distinguish this item from sleeve bearings with lubrication grooves, drilled passages, or other machined surface features.

The listed material is steel, and the recorded weight is 0.4 lb. The additional dimensions of 5.8 cm in length, 4.9 cm in width, and 6.1 cm in depth are included as the available product dimensions. The part identification, machine model, diameter, and overall length should correspond to the bearing being replaced.