9S5214 Composite Bearing for Caterpillar Equipment

9S5214 is a composite bearing used in Caterpillar equipment, including Caterpillar engine-machine applications and Caterpillar wheel tractor-scrapers. This is a new aftermarket spare part manufactured by CTP (Costex Tractor Parts).

The bearing is identified by the SKU 9S5214 and is intended for installation in equipment where the listed Caterpillar part number or one of the specified interchange numbers is required. The available application data identifies the compatible equipment by model and machine type rather than by a particular bearing position.

Fitment

The part is listed for the following Caterpillar equipment models and applications:

• Caterpillar 3408
• Caterpillar 3408C
• Caterpillar 3408E
• Caterpillar 657E
• Caterpillar engine-machine applications
• Caterpillar wheel tractor-scraper applications

Model and application compatibility should be checked against the machine serial number and the bearing removed from the equipment before installation, especially where the same machine series was produced in different configurations.

Cross-reference numbers

The following numbers are listed as replacement or interchange references for this bearing:

These references identify numbers associated with the same bearing application. The part number stamped or recorded for the machine should be compared with the references above before ordering or fitting the component.

Specifications

The stated dimensions are length 5.8 cm, width 4.9 cm, and depth 6.1 cm. The supplied product data does not specify the bearing’s installation position, internal diameter, external diameter, bearing width, clearance, material composition beyond the composite classification, or any additional components included with the part.