9R2807 Clip fit Caterpillar
9R2807 Clip fit Caterpillar
- New aftermarket part
- 30 day returns
- Manufacturer's warranty
9R2807 Clip for Caterpillar Backhoe Loaders
The 9R2807 clip is a steel retaining hardware component used on Caterpillar backhoe loaders. It is a new aftermarket spare part manufactured by CTP (Costex Tractor Parts).
Fitment
This clip is listed for Caterpillar backhoe loader equipment, including the following models:
- Caterpillar 414E
- Caterpillar 416B
- Caterpillar 416C
- Caterpillar 416D
- Caterpillar 416E
- Caterpillar 420D
- Caterpillar 420E
- Caterpillar 422E
- Caterpillar 424D
- Caterpillar 426C
Fitment should be verified against the machine model and the installed component before ordering, as the listed equipment series may use different hardware configurations depending on the machine arrangement.
Cross-reference numbers
- 9R2807
- 9R-2807
The numbers 9R2807 and 9R-2807 identify the same clip format and are shown as the applicable part number designations for this component.
Specifications
| Part type | Clip |
| Equipment type | Backhoe loader |
| Equipment manufacturer | Caterpillar |
| Material | Steel |
| Surface plating | Zinc |
| Clamp width | 18 mm |
| Clamp height | 22 mm |
| Pin groove diameter | 8 mm |
| Finger diameter | 9.97 mm |
| Weight | 0.1 lb |
| Length | 8.89 cm |
| Width | 15.24 cm |
| Depth | 1.27 cm |
The clip dimensions are specified as clamp width, clamp height, pin groove diameter, and finger diameter. The listed length, width, and depth are packaging or overall dimensional values supplied for the part and should not be interpreted as additional installation dimensions unless they correspond with the component being replaced.
Questions 9R2807 Clip fit Caterpillar 0 questions