2H7254 Oil Filter for Caterpillar Equipment

2H7254 is an oil filter element used in Caterpillar engines and engine-generator sets. This is a new aftermarket spare part manufactured by CTP (Costex Tractor Parts).

The part is identified as Caterpillar Element O and is intended for oil filtration in the listed Caterpillar engine applications. The supplied product data specifies the filter for industrial engines and generator-set applications rather than for a particular machine position.

Fitment

The 2H7254 oil filter element is used with the following Caterpillar engine models:

• Caterpillar 3306
• Caterpillar 3304
• Caterpillar D330C
• Caterpillar D333C
• Caterpillar D342C
• Caterpillar D343
• Caterpillar D353C
• Caterpillar D353D
• Caterpillar D353E
• Caterpillar D379
• Caterpillar D379B
• Caterpillar D398
• Caterpillar D398B
• Caterpillar D399

It is also listed for Caterpillar engine-generator sets equipped with the following engines:

• Caterpillar D379B
• Caterpillar D398B
• Caterpillar D399
• Caterpillar SR4

Fitment should be checked against the engine model and the part number on the filter being replaced. The model list above covers the applications stated for this product and does not extend to other Caterpillar engines or equipment models.

Cross-reference numbers

The filter is listed under the following number formats:

2H7254 and 2H-7254 refer to the same filter identification with different punctuation formats. When checking an installed filter or parts catalog, both number formats may be used for this part.

Specifications

The stated dimensions are 20 cm in length, 15.5 cm in width, and 15.5 cm in depth. The listed weight is 2.1 lb. The supplied specifications do not state the filter media material, thread size, seal material, bypass-valve setting, micron rating, or package contents; these parameters are therefore not included.