9W6198 End Bit (Left-Hand) for Caterpillar Equipment

The 9W6198 is a left-hand end bit for Caterpillar equipment, including Caterpillar track-type tractor and machine applications listed below. The part is identified as an end bit for a bulldozer cutting-edge assembly and is designated for the left-hand position.

This is a new aftermarket spare part manufactured by CTP (Costex Tractor Parts).

Fitment

The part is listed for the following Caterpillar equipment and model identifiers:

• Caterpillar 3176C
• Caterpillar 3306
• Caterpillar C9
• Caterpillar C9.3
• Caterpillar 7A
• Caterpillar 7S
• Caterpillar 7SU
• Caterpillar 7U
• Caterpillar 7
• Caterpillar D7E

The supplied application data identifies the part for Caterpillar engine-machine equipment and Caterpillar track-type tractor equipment. Compatibility should be checked against the machine serial number, the existing cutting-edge configuration, and the position of the required end bit before installation.

The model identifiers above are reproduced from the available application data. They represent the listed Caterpillar applications for the 9W6198 end bit and do not indicate that the part is manufactured by Caterpillar.

Cross-reference numbers

The 9W6198 end bit is listed under the following part numbers:

• 9W6198
• 9W-6198
• 3G8316
• 7T6588

9W6198 and 9W-6198 are two written formats of the same Caterpillar reference number. The numbers 3G8316 and 7T6588 are listed as interchangeable or cross-reference numbers for this part. Cross-reference information should be verified with the machine parts book when several cutting-edge or end-bit configurations are available for the same model.

Specifications

The listed dimensions are length, width, and depth as provided for the 9W6198 part. The available product data does not specify material grade, mounting-hole pattern, fasteners, or whether additional installation hardware is included. The item is described as the end bit itself; no additional components are identified as included.