8T4994 Flat Washer fit Caterpillar
8T4994 Flat Washer fit Caterpillar
- New aftermarket part
- 30 day returns
- Manufacturer's warranty
8T4994 Flat Washer for Caterpillar Equipment
The 8T4994 is a flat washer used with Caterpillar equipment. Caterpillar is the manufacturer of the equipment for which this hardware part is specified. This is a new aftermarket spare part manufactured by CTP (Costex Tractor Parts).
The washer is intended for use as fastening hardware between a bolt or other threaded fastener and the supported component. It is supplied as a flat, hardened-steel washer with a mechanically galvanized surface. The available product data identifies the part for Caterpillar equipment but does not provide a specific machine model or series.
Specifications
| Part type | Flat washer |
| Equipment brand | Caterpillar |
| Application | Hardware for Caterpillar equipment |
| Material | Hardened steel |
| Material description | Hardened steel with a minimum yield strength of 1000 MPa |
| Surface finish | Galvanized |
| Coating | Mechanical galvanization |
| Coating test information | Salt spray resistance listed as 96 hours |
| Hardening | Hardened |
| Washer configuration | Flat, round washer |
| Inner diameter | 0.787 in |
| Outside diameter | 1.437 in |
| Thickness | 0.118 in |
| Approximate inner diameter | 0.78 in |
| Approximate outside diameter | 1.44 in |
| Approximate thickness | 0.14 in |
| Weight | 0.1 lb |
| Listed length | 8.89 cm |
| Listed width | 15.24 cm |
| Listed depth | 1.27 cm |
The dimensional data includes both precise inch values and separately listed approximate values. The precise values are 0.787 in for the inner diameter, 1.437 in for the outside diameter, and 0.118 in for thickness. Verify the washer dimensions against the fastener and assembly requirements before installation.
Questions 8T4994 Flat Washer fit Caterpillar 0 questions