2S4750 Beaded Gasket for Caterpillar Equipment — SKU 2S4750

The 2S4750 Beaded Gasket is a sealing component used between mating surfaces in Caterpillar earthmoving compactors and Caterpillar engine machines. This is a new aftermarket spare part manufactured by CTP (Costex Tractor Parts).

The gasket is identified by the Caterpillar equipment part number 2S-4750 and is intended for applications where a joint between two mating surfaces requires sealing against leakage and contamination. Fitment should be confirmed by equipment model and the applicable part number before installation.

Fitment

The gasket is listed for the following equipment manufactured by Caterpillar:

• 816F earthmoving compactor
• 816F II earthmoving compactor
• 815B earthmoving compactor
• 815F earthmoving compactor
• 815F II earthmoving compactor
• 3176C engine machine
• 3196 engine machine
• 3306 engine machine
• C-12 engine machine
• C-13 engine machine

The listed applications cover Caterpillar 800-series compactors and the 3176C, 3196, 3306, C-12, and C-13 engine machine applications. Model designation and machine serial number may be required to verify the exact installation position.

Cross-reference numbers

The number 2S4750 is also written in hyphenated form as 2S-4750. These designations refer to the same gasket identification provided for the listed Caterpillar equipment applications.

Specifications

The listed dimensions describe the gasket as a flat sealing component with an overall length of 121 mm and an overall width of 114 mm. The stated depth is 0.08 cm, and the listed weight is 0.01 lb. Dimensions and weight are provided for part identification and handling reference.

Installation position, sealing-surface configuration, and exact application may vary between the listed Caterpillar machine models and engine machines. Use the 2S4750 or 2S-4750 identification together with the equipment model when checking compatibility.