2V2006 Gear 40t for Caterpillar

The 2V2006 is a spiral bevel gear used in Caterpillar wheel tractor-scraper equipment, including the Caterpillar 613 model. It is a 40-tooth gear intended for installation in the applicable gear assembly of the machine.

This is a new aftermarket spare part manufactured by CTP (Costex Tractor Parts). The equipment brand associated with the fitment is Caterpillar; Caterpillar is identified here as the manufacturer of the equipment on which the part is used.

Fitment

• Equipment manufacturer: Caterpillar
• Equipment type: Wheel tractor-scraper
• Machine model: Caterpillar 613
• Part application: Spiral gear within the applicable bevel gear and gear set assembly

Cross-reference numbers

The following numbers are associated with this gear and may be used for part identification and interchange reference:

• 2V2006
• 2234805

Part-number matching should be checked against the machine serial number and the configuration of the installed gear assembly before fitting. The reference numbers identify the part designation and do not change the specified equipment application.

Specifications

Part identification

The part is listed under SKU 2V2006. The primary identification is the 2V2006 spiral gear designation, while 2234805 is an additional cross-reference number associated with the same application. The supplied dimensional data describes the listed part as 36.2 cm in length, 36.2 cm in width and 4.4 cm in depth, with a listed weight of 30.5 lb.

Use the gear as a component of the applicable Caterpillar 613 bevel gear or gear set assembly. The installation position, mating gear and complete assembly arrangement should be confirmed from the machine parts information for the relevant Caterpillar 613 configuration.