2H6488 Hex Head Bolts fit Caterpillar
2H6488 Hex Head Bolts fit Caterpillar
- New aftermarket part
- 30 day returns
- Manufacturer's warranty
2H6488 Hex Head Bolt for Caterpillar Equipment
2H6488 is a steel hex head bolt used in Caterpillar equipment, including Challenger tractors and cold planers. This is a new aftermarket spare part manufactured by CTP (Costex Tractor Parts).
The bolt is listed for fastening applications on the equipment models specified below. The catalog data identifies the part as a high-strength fastener with a standard coarse thread, phosphate-and-oil surface treatment, and a nominal weight of 0.4 lb.
Fitment
- Caterpillar Challenger equipment
- Caterpillar Cold Planer equipment
- Caterpillar MT835
- Caterpillar MT845
- Caterpillar MT855
- Caterpillar MT865
- Caterpillar MTC835
- Caterpillar MTC845
- Caterpillar MTC855
- Caterpillar MTC865
- Caterpillar PM-201
- Caterpillar PM-465
Fitment should be confirmed against the equipment serial number and the fastener dimensions before installation, especially where several bolt sizes are used within the same assembly.
Cross-reference numbers
| SKU | 2H6488 |
| Equipment manufacturer part number format | 2H-6488 |
| Part type | Hex head bolt |
2H6488 and 2H-6488 identify the same catalog reference with different punctuation. No additional supplier reference numbers are provided in the available part data.
Specifications
| Part category | Head bolt |
| Bolt type | Hex head bolt |
| Material | Steel |
| Material specification | ASTM F2882 |
| Material strength description | Break strength 1170 MPa / 170 ksi |
| Surface coating | Phosphate and oil |
| Finish description | Phosphate coating impregnated with oil |
| Thread type | Standard coarse thread |
| Thread size | 1/2 in - 13 threads per inch |
| Hole thread pitch | 13 |
| Nominal bolt length | 5 in |
| Head height | 0.39 in |
| Head width | 0.75 in |
| Handle thickness | 3.75 in |
| Connecting square | 3/4 in |
| Grapple length | 2 to 3.75 in |
| Recorded slope | 11.9 |
| Recorded head-height range | 4 in - 0.39 in |
| Recorded total bolt-length range | 3 in - 5 in |
| Strength classification in catalog data | High-strength bolt |
| Weight | 0.4 lb |
| Catalog length | 14 cm |
| Catalog width | 1.2 cm |
| Catalog depth | 1.9 cm |
The listed dimensions include both inch-based fastener measurements and catalog package or item measurements in centimeters. For installation, use the thread designation 1/2-13 and verify the bolt length, head clearance, and mating hardware against the Caterpillar assembly being serviced.
The supplied part is a single hex head bolt unless the equipment repair documentation specifies additional washers, nuts, or related fastening components. These components are not included in the stated part data.
Questions 2H6488 Hex Head Bolts fit Caterpillar 0 questions