6D5801 Self-locking Hex Head Nut fit Caterpillar
6D5801 Self-locking Hex Head Nut fit Caterpillar
- New aftermarket part
- 30 day returns
- Manufacturer's warranty
6D5801 Self-locking Hex Head Nut fit Caterpillar
6D5801 is a self-locking hex head nut for Caterpillar equipment. It is a new aftermarket spare part manufactured by CTP (Costex Tractor Parts).
The part is identified by the number 6D-5801 in the supplied technical data and by the store SKU 6D5801. The nut has a #8-32 thread, a hardened SAE Grade 8 equivalent material specification, and a galvanized zinc finish.
Fitment
- Caterpillar equipment.
- Specific Caterpillar machine models and series are not listed in the available product data.
Cross-reference numbers
- 6D-5801
- 6D5801 — store SKU and unhyphenated part number format.
Specifications
| Part type | Self-locking hex head nut |
| Equipment manufacturer | Caterpillar |
| Part number | 6D-5801 |
| SKU | 6D5801 |
| Thread designation | #8-32 |
| Thread pitch | 32 threads per inch |
| Thread type | Standard coarse thread |
| Nut type | Self-locking hex nut |
| Material specification | SAE Grade 8 equivalent |
| Material condition | Hardened |
| Coating | Galvanized zinc |
| Finish | Galvanized |
| Salt spray rating | 96 hours |
| Weight | 0.1 lb |
| Listed length | 0.6 cm |
| Listed width | 0.5 cm |
| Listed depth | 0.5 cm |
The thread size is specified as #8-32, meaning a nominal #8 thread with 32 threads per inch. The supplied data describes the thread as standard coarse and identifies the nut as self-locking. The self-locking design is part of the nut construction and is intended for threaded fastening applications on the specified equipment.
The nut is hardened and listed as SAE Grade 8 equivalent. Its surface is described as galvanized zinc with a galvanized finish. The available data also specifies a 96-hour salt spray rating for the coating.
The listed dimensions are 0.6 cm in length, 0.5 cm in width, and 0.5 cm in depth. The product weight is stated as 0.1 lb. Separate source entries for nut height and nut width contain inconsistent notation and are not included as dimensional specifications.