Holder AS-Brush 8T8570 for Caterpillar Challenger

Holder AS-Brush, SKU 8T8570, is a bit cutter component used on Caterpillar Challenger equipment. It is installed on the listed Challenger tractor models as a holder associated with the AS-Brush assembly.

This is a new aftermarket spare part manufactured by CTP (Costex Tractor Parts).

Fitment

The 8T8570 Holder AS-Brush is specified for Caterpillar Challenger equipment. The compatible model designations are listed below:

• Caterpillar Challenger 65C
• Caterpillar Challenger 65D
• Caterpillar Challenger 65E
• Caterpillar Challenger 75C
• Caterpillar Challenger 75D
• Caterpillar Challenger 75E
• Caterpillar Challenger 85C
• Caterpillar Challenger 85D
• Caterpillar Challenger 85E
• Caterpillar Challenger 95E

Fitment should be checked by comparing the equipment model designation and the reference number with the part installed on the machine. The model list identifies Caterpillar Challenger tractors for which this holder is specified; it does not indicate that the part is manufactured by Caterpillar.

Cross-reference numbers

The part is identified by the following reference number:

8T8570 and 8T-8570 refer to the same listed part number format. The number is provided for identification and cross-reference purposes when matching the holder to Caterpillar Challenger equipment.

Specifications

The dimensions supplied for the part are 14.2 cm in length, 5.5 cm in width, and 14.7 cm in depth. The stated weight is 0.8 lb. These specifications describe the holder supplied under SKU 8T8570.

The equipment brand referenced for fitment is Caterpillar, while CTP (Costex Tractor Parts) is the manufacturer of this aftermarket part. The listed holder is intended for identification against Caterpillar Challenger models 65C, 65D, 65E, 75C, 75D, 75E, 85C, 85D, 85E, and 95E.