In stock
SKU: 8C5237
8C5237 O-Ring fit Caterpillar
In stock
SKU: 8C5237
8C5237 O-Ring fit Caterpillar
- New aftermarket part
- 30 day returns
- Manufacturer's warranty
$4.00
Delivery
Shipping cost will be calculated at checkout. Available shipping methods:
8C5237 O-Ring for Caterpillar Asphalt Pavers
8C5237 is a standard O-ring used as an axial or radial seal in Caterpillar asphalt paving equipment. The seal is made of NBR nitrile rubber with a hardness of 75 Shore A and is supplied as a new aftermarket spare part manufactured by CTP (Costex Tractor Parts).
The O-ring is intended to help prevent leakage and contamination at the sealing point. The supplied dimensional data identifies this part by SAE AS568 dash size -48, with the inch measurements listed below.
Fitment
The 8C5237 O-ring is listed for Caterpillar asphalt pavers, including the following equipment models:
- Caterpillar AP-1000
- Caterpillar AP-1000B
- Caterpillar AP-1000D
- Caterpillar AP-1050
- Caterpillar AP-1050B
- Caterpillar AP-1055B
- Caterpillar AP-1055D
- Caterpillar AP-650B
- Caterpillar AP-800C
- Caterpillar AP-800D
Cross-reference numbers
The part is identified by the following number formats:
- 8C5237
- 8C-5237
Specifications
| Part type | O-ring |
| Seal type | Standard |
| Equipment brand | Caterpillar |
| Equipment type | Asphalt paver |
| Material | NBR nitrile rubber |
| Main seal material | Rubber |
| Hardness | 75 Shore A |
| Colour | Black |
| SAE AS568 dash size | -48 |
| Nominal size | 48 |
| Cross-section diameter | 0.07 in |
| Inner diameter | 4.74 in |
| Outside diameter | 4.879 in |
| Coating | None |
| Weight | 0.1 lb |
| Length | 13 cm |
| Width | 13 cm |
| Depth | 0.1 cm |
Questions 8C5237 O-Ring fit Caterpillar 0 questions