2P6819 Non-Cogged V-Belt

Part number 2P6819 is a non-cogged V-belt used in the engine belt systems of Caterpillar equipment. It is a V-belt for Caterpillar articulated dump trucks, engine-machine applications, track-type loaders, and wheel-type loaders.

This is a new aftermarket spare part manufactured by CTP (Costex Tractor Parts).

The belt is listed for use with Caterpillar equipment models and engines including D250E, D250E II, D300E, D300E II, 3116, 3304, 3306, 3406, 953C, and 920. The equipment brand identified for fitment is Caterpillar; the belt is not identified as a Caterpillar-manufactured part.

Fitment

• Caterpillar articulated dump truck: D250E, D250E II, D300E, D300E II
• Caterpillar engine-machine applications: 3116, 3304, 3306, 3406
• Caterpillar track-type loader: 953C
• Caterpillar wheel-type loader: 920

The available fitment information identifies the following Caterpillar models: D250E, D250E II, D300E, D300E II, 3116, 3304, 3306, 3406, 953C, and 920. Compatibility should be checked against the equipment model and the belt specification before installation, especially where the same machine series is available with different engine or belt configurations.

Specifications

The primary belt dimensions supplied for part 2P6819 are a width of 0.50 inch and a length of 45.98 inches. The available data also lists a weight of 0.5 lb and dimensions of 7.5 cm in length, 3 cm in width, and 20 cm in depth. These dimensional values are reproduced as provided and are not reinterpreted as additional belt-profile measurements.

Part 2P6819 is specified for the belt-drive applications listed above on Caterpillar D250E, D250E II, D300E, D300E II, 3116, 3304, 3306, 3406, 953C, and 920 equipment. No cross-reference numbers from the equipment manufacturer or other suppliers are included in the available product data.