1068223 Pad A for Caterpillar Equipment

The 1068223 Pad A is a pad assembly component used on Caterpillar engines and off-highway trucks. It is intended for the Caterpillar equipment models listed below. The supplied part is a new aftermarket spare part manufactured by CTP (Costex Tractor Parts).

This product is identified by SKU 1068223 and is listed in the Pad Assemblies category. The part name “Pad A” is used together with the Caterpillar equipment application and the corresponding cross-reference numbers provided below.

Fitment

The 1068223 Pad A is used on the following Caterpillar equipment models and machine series:

• Caterpillar 3408 engine
• Caterpillar 3408C engine
• Caterpillar 3408E engine
• Caterpillar 3412 engine
• Caterpillar 3412D engine
• Caterpillar 3412E engine
• Caterpillar 769D off-highway truck
• Caterpillar 771C off-highway truck
• Caterpillar 771D off-highway truck
• Caterpillar 775B off-highway truck

Fitment is specified for Caterpillar equipment in the 3408 and 3412 engine range and for the 769D, 771C, 771D, and 775B off-highway truck models. The exact installation position is identified by the part designation Pad A.

Cross-reference numbers

The following part numbers are listed as cross-reference numbers for the 1068223 Pad A:

• 1068223
• 9D6311
• 7D2258

Part number 1068223 is the SKU and the primary identification number for this product. Numbers 9D6311 and 7D2258 are additional identification numbers associated with the same pad application.

Specifications

The dimensions supplied for this part are 28 cm in length, 28 cm in width, and 0.1 cm in depth. The listed weight is 12.2 lb. These measurements describe the pad assembly identified by SKU 1068223 and should be checked against the equipment configuration and the removed component during parts identification.

The listed application covers Caterpillar 3408, 3408C, 3408E, 3412, 3412D, and 3412E engines, as well as Caterpillar 769D, 771C, 771D, and 775B off-highway trucks. The cross-reference numbers 9D6311 and 7D2258 should be considered together with the equipment model and the part location when confirming compatibility.