1157048 Pin fit Caterpillar
1157048 Pin fit Caterpillar
- New aftermarket part
- 30 day returns
- Manufacturer's warranty
1157048 Pin for Caterpillar Wheel Loaders
1157048 is a collet pin used on Caterpillar wheel loaders. The part is made of steel and has a hard chrome-plated surface. This is a new aftermarket spare part manufactured by CTP (Costex Tractor Parts).
The pin is identified by SKU 1157048 and is also written in the hyphenated format 115-7048. Its design includes a puller hole for removal. The supplied product data specifies that the pin has no grease passage.
Fitment
The pin is used with the following Caterpillar wheel loader models:
- 980G
- 980G II
- 980H
- 980K
- 980K HLG
These models are listed as the compatible equipment for part number 115-7048. The part category is pins, and the pin type is specified as a collet pin.
Cross-reference numbers
| SKU | 1157048 |
| Hyphenated part number format | 115-7048 |
The numbers 1157048 and 115-7048 refer to the same part-number format, with and without the separator. The available product data identifies 115-7048 as the number associated with the listed Caterpillar wheel loader applications.
Specifications
| Part type | Pin |
| Pin design | Collet pin |
| Material | Steel |
| Surface treatment | Hard chrome plated |
| Finger diameter | 3.5 in |
| Length | 8.27 in |
| Removal feature | Puller hole |
| Grease passage | None |
| Weight | 20.06 lb |
| Listed length dimension | 11.27 cm |
| Listed width dimension | 11.25 cm |
| Listed depth dimension | 11.25 cm |
The inch and centimetre measurements are reproduced according to the available product data. The dimensional values shown as length, width and depth are listed separately from the specified 8.27-inch pin length.
Questions 1157048 Pin fit Caterpillar 0 questions