Pin 1302533 for Caterpillar Equipment

Pin 1302533 is a straight pin used on Caterpillar backhoe loaders and related machine models listed below. The part is made of steel, has a zinc-plated surface, an internal lubrication groove serviced through the pin, and a puller hole for removal. This is a new aftermarket spare part manufactured by CTP (Costex Tractor Parts).

Fitment

The pin is specified for the following Caterpillar equipment and model designations:

• Backhoe Loader
• 426B
• 426C
• 430
• 430D
• 430E
• 430F
• 430F2
• 436C
• 442E
• 444E

The fitment information applies to the part number 130-2533 and covers the Caterpillar backhoe loader models identified in the supplied application data. Model designation and machine series should be checked against the equipment serial number and the pin installed on the machine before ordering or installation.

Cross-reference numbers

Numbers 1302533 and 130-2533 identify the same pin designation in the supplied product data. Caterpillar is the equipment manufacturer associated with the listed applications; the part described here is manufactured by CTP.

Specifications

Construction and service features

• The working part is manufactured from steel.
• The pin has a straight cylindrical design.
• An internal groove allows grease to be supplied through the pin.
• The zinc-plated surface is part of the stated pin specification.
• A puller hole is provided as a removal aid during service work.
• The supplied part is identified by SKU 1302533 and reference number 130-2533.

Application data, reference numbering, and dimensions are provided for identification of the Caterpillar equipment pin. The listed inch dimensions describe the pin, while the centimetre values are recorded as product dimensions in the supplied data.