Pin 5J2982 for Caterpillar equipment

5J2982 is a straight steel pin used on Caterpillar wheeled tractor-scrapers and the compatible 621 and 627 machine series. This is a new aftermarket spare part manufactured by CTP (Costex Tractor Parts).

The pin is intended for installation in the relevant pin connection of the listed Caterpillar machines. The supplied part is specified as an unplated straight pin with a puller hole for removal. No inner groove is specified for this part.

Fitment

The pin is listed for the following Caterpillar wheeled tractor-scraper models and machine series:

• Wheeled Tractor-Scraper
• 621
• 621B
• 621E
• 621F
• 621G
• 621H
• 621K
• 627
• 627B
• 627E
• 627F
• 627G
• 627H
• 627K
• 627K LRC

Fitment should be checked against the machine model and serial-number configuration before installation, because the listed machine series may include different component configurations. The dimensions and design features below are provided for part identification and comparison with the removed pin.

Cross-reference numbers

The part is identified under the following numbers:

• 5J2982
• 5J-2982

5J2982 is the SKU used for this listing, while 5J-2982 is the hyphenated part-number format shown for the same pin. These numbers refer to the pin described on this page.

Specifications

The listed inch and metric values are the dimensional data provided for the part. The 2.6-inch finger diameter and 5.39-inch length describe the pin geometry, while the 15 cm length, 6 cm width, and 6 cm depth are the stated overall package or part dimensions. The pin has no specified inner groove, and its removal aid is a puller hole.