6Y6775 Pin fit Caterpillar
6Y6775 Pin fit Caterpillar
- New aftermarket part
- 30 day returns
- Manufacturer's warranty
6Y6775 Pin for Caterpillar Equipment
6Y6775 is a straight steel pin used on Caterpillar track-type tractors and skidding tractors. This is a new aftermarket spare part manufactured by CTP (Costex Tractor Parts).
The part is identified by SKU 6Y6775 and is listed for the Caterpillar equipment models and series specified below. The supplied application data includes track-type tractor configurations and skidding tractor configurations.
Fitment
- Caterpillar track-type tractors
- Caterpillar 5
- Caterpillar 5P
- Caterpillar 5S
- Caterpillar D5
- Caterpillar D5H
- Caterpillar D5H XL
- Caterpillar skidding tractors
- Caterpillar 527
- Caterpillar D5HTSK II
The fitment information above is based on the compatible-model data associated with part number 6Y-6775. Equipment identification should be checked against the machine model and the installed component before ordering or installation.
Cross-reference numbers
- Caterpillar part number: 6Y-6775
- Product SKU: 6Y6775
The numbers 6Y6775 and 6Y-6775 refer to the same listed part number format. No additional supplier cross-reference numbers are provided in the available product data.
Specifications
| Part category | Pin |
| Pin type | Straight pin |
| Material | Steel |
| Plating | Unplated |
| Finger diameter | 2.48 in |
| Length | 20.67 in |
| Removal aid | No puller hole |
| Inner groove | None |
| Weight | 28.5 lb |
| Length in supplied dimensional data | 67.3 cm |
| Width in supplied dimensional data | 6.2 cm |
| Depth in supplied dimensional data | 6.2 cm |
The pin has a straight design, steel construction, unplated surface, and no inner groove. The supplied configuration also specifies that the pin does not have a puller hole. The listed inch and centimetre measurements are retained from the available part data and should be compared with the dimensions of the removed pin and the machine assembly.
Questions 6Y6775 Pin fit Caterpillar 0 questions