8J0928 Pin for Caterpillar Equipment

8J0928 is a straight pin used in Caterpillar track-type tractors, excavators and track-type loaders. This is a new aftermarket spare part manufactured by CTP (Costex Tractor Parts).

The part is listed for Caterpillar equipment in several machine series, including compact and standard track-type tractor models, the 315C and 315D L excavators, and the 931 track-type loader. The fitment information below identifies the machine series and model designations associated with part number 8J0928.

Fitment

• Equipment brand: Caterpillar
• Track-type tractors: 3, 3P, 3S, 3S LGP, 53, 5A, PAT
• D3 series: D1, D2, D3, D3B, D3C, D3C II, D3C III, D3G, D3K LGP, D3K XL, D3K2 LGP, D3K2 XL
• D4 series: D4B, D4C, D4C II, D4C III, D4G, D4K LGP, D4K XL, D4K2 LGP, D4K2 XL
• D5 series: D5C, D5C III, D5C PAT, D5K LGP, D5K XL, D5K2 LGP, D5K2 XL
• Excavators: Caterpillar 315C and 315D L
• Track-type loaders: Caterpillar 931

Cross-reference numbers

• 8J-0928
• 8J0928

The designations 8J-0928 and 8J0928 refer to the same part-number format with and without the hyphen. The SKU for this product is 8J0928.

Specifications

The dimensions supplied for the pin are 1.49 inches for the finger diameter, 7.73 inches for pin length B and 7.72 inches for the stated overall length. The product data also lists separate product dimensions of 5 cm in length, 5 cm in width and 24 cm in depth.

The pin is supplied as a straight steel component. The listed configuration has no plating, no inner groove and no puller hole. Compatibility should be checked against the machine model, series and existing part number before installation.