2284093 Pin As fit Caterpillar
2284093 Pin As fit Caterpillar
- New aftermarket part
- 30 day returns
- Manufacturer's warranty
2284093 Pin Assembly for Caterpillar Equipment
Pin assembly, SKU 2284093, is used in Caterpillar tracked bulldozers, including D6R, D6R III, D6R LGP, D6R STD, D6R XL and D6T configurations. This is a new aftermarket spare part manufactured by CTP (Costex Tractor Parts).
The part is identified as a flag pin and is supplied with a puller hole for removal. The pin has a steel construction, hard chrome plating and an inner groove designed for grease passage through the pin.
Fitment
The following Caterpillar equipment applications are specified for this pin assembly:
- Tracked bulldozers
- Caterpillar D6R
- Caterpillar D6R III
- Caterpillar D6R LGP
- Caterpillar D6R STD
- Caterpillar D6R XL
- Caterpillar D6T
Fitment is listed by machine series and configuration. Before installation, the part number and the dimensions of the removed pin should be checked against the equipment identification and the applicable assembly.
Cross-reference numbers
| SKU | 2284093 |
| Part number format | 228-4093 |
| Cross-reference description | Pin assembly / PIN AS |
Numbers 2284093 and 228-4093 identify the same listed part in different number formats. The number 228-4093 is associated with the specified Caterpillar tracked bulldozer applications.
Specifications
| Part type | Pin assembly |
| Pin type | Flag pin |
| Equipment brand | Caterpillar |
| Equipment category | Tracked bulldozer |
| Material | Steel |
| Surface treatment | Hard chrome plated |
| Finger diameter | 2.76 in |
| Length | 8.27 in |
| Removal feature | Puller hole |
| Inner groove | Greased through pin |
| Listed weight | 15.2 lb |
| Listed length | 21 cm |
| Listed width | 18.4 cm |
| Listed depth | 12.1 cm |
The dimensional data is provided in both inch and centimetre units where specified. The 2.76-inch value refers to the finger diameter, while the 8.27-inch value refers to the pin length. The length, width and depth values are listed separately as product dimensions.
The puller hole is part of the pin design and is intended for removal access. The inner groove is specified as a grease-through feature. Installation position and service procedure depend on the particular Caterpillar bulldozer configuration in which the pin assembly is used.
Questions 2284093 Pin As fit Caterpillar 0 questions