Pivot Pin 2519832 for Caterpillar Equipment

Pivot pin 2519832 is a headed pin used in the pivot connection of Caterpillar tracked bulldozers. The part is a new aftermarket spare part manufactured by CTP (Costex Tractor Parts).

The part is identified by SKU 2519832 and is intended for installation on the Caterpillar machine models and series listed below. The supplied specifications identify the component as a steel, unplated headed pin without a puller hole.

Fitment

This pivot pin is listed for the following Caterpillar tracked bulldozers and machine series:

• Tracked Bulldozer
• D5R2
• D6GC
• D6R
• D6R III
• D6R STD
• D6R XL
• D6T
• D6T LGP
• D6T XL
• D6T XW

Fitment should be checked against the machine model, series designation and the part number installed on the equipment before assembly. The listed applications refer to Caterpillar equipment; Caterpillar is the manufacturer of the machines for which this part is specified.

Cross-reference numbers

The part is identified by the following number formats:

2519832 and 251-9832 refer to the same listed pivot pin identification. No additional supplier or equipment-manufacturer cross-reference numbers are provided in the available product data.

Specifications

The diameter and length values are listed in inches, while the product dimensions are listed separately in centimetres. The product dimensions are 61 cm in length, 20 cm in width and 20 cm in depth. The listed weight is 89.6 lb.