7N1760 Exhaust Pipe for Caterpillar Equipment

The 7N1760 exhaust pipe is a component of the exhaust system used on Caterpillar wheel-type loaders, earthmoving compactors, and wheel dozers. It channels exhaust gases from the engine area to the remaining exhaust system and is formed from cast iron tubes. This is a new aftermarket spare part manufactured by CTP (Costex Tractor Parts).

Fitment

The part is listed for the following Caterpillar equipment models and machine series:

• Wheel-type loaders: 980C, 980F, 980F II
• Earthmoving compactors: 825C, 825, 826C
• Wheel dozers: 824C, 824S

Fitment is associated with the exhaust system configuration of the listed Caterpillar machines. The component is identified as an exhaust pipe or exhaust ejector in the supplied application data. Verification against the machine serial number and the installed exhaust-system configuration is recommended when several configurations are available for the same model series.

The listed applications cover three Caterpillar equipment groups. The 980C, 980F, and 980F II are identified as wheel-type loaders; the 825, 825C, and 826C are identified as earthmoving compactors; and the 824C and 824S are identified as wheel dozers.

Cross-reference numbers

• 7N-1760 — hyphenated part-number designation for SKU 7N1760
• 7N1760 — non-hyphenated part-number designation

The two designations above refer to the same part number format used for this exhaust pipe. No additional supplier or equipment-manufacturer cross-reference numbers are provided in the available product data.

Specifications

The dimensional data identifies a length of 39.74 inches, equivalent to 99.06 cm, and an inner diameter of 6.18 inches. The supplied additional dimensions are 35.56 cm in width and 30.48 cm in depth, with a listed weight of 16 lb. These measurements describe the part data associated with SKU 7N1760.