Serpentine Belt 1892216 for Caterpillar Equipment

Serpentine belt SKU 1892216 is a V-ribbed drive belt for Caterpillar equipment. It is used on Caterpillar Challenger tractors and Caterpillar earthmoving compactors. This is a new aftermarket spare part manufactured by CTP (Costex Tractor Parts).

The belt is identified by an eight-rib profile and a specified belt length of 90.39 inches. The fitment information below covers the Caterpillar equipment groups and models listed for this part number.

Fitment

The belt is used on equipment manufactured by Caterpillar in the following equipment groups:

• Caterpillar Challenger
• Caterpillar earthmoving compactors

Listed compatible Caterpillar models:

• Caterpillar MT735
• Caterpillar MT745
• Caterpillar MT755
• Caterpillar MT765
• Caterpillar MTC735
• Caterpillar MTC745
• Caterpillar MTC755
• Caterpillar MTC765
• Caterpillar 816F II
• Caterpillar 815F II

Compatibility is specified for the models above. The model designation should be checked against the identification information on the machine before installation, particularly where several machines use different belt configurations.

Cross-reference numbers

The numbers 1892216 and 189-2216 identify the same belt designation in the supplied product data. No additional equipment-manufacturer or supplier numbers are specified.

Specifications

The 90.39-inch value is specified as the belt length, while the 1.10-inch value is specified as the belt width. The additional dimensions of 7.5 cm, 3 cm and 20 cm are included as listed in the product data and are not identified there as belt working dimensions.

Part category: serpentine belts PK.