3071965 Pivot Shaft fit Caterpillar
3071965 Pivot Shaft fit Caterpillar
- New aftermarket part
- 30 day returns
- Manufacturer's warranty
3071965 Pivot Shaft for Caterpillar Equipment
3071965 is a pivot shaft used in Caterpillar equipment, including the AUTOGRADER machine series and the Caterpillar 16M, 24H, and 24M models. This is a new aftermarket spare part manufactured by CTP (Costex Tractor Parts).
The part is identified as a pivot shaft and is supplied under the SKU 3071965. The available application data identifies Caterpillar as the equipment manufacturer and lists the compatible machine designations below. Confirm the machine model and the number stamped or listed for the removed shaft before installation.
Fitment
- Caterpillar AUTOGRADER equipment
- Caterpillar 16M
- Caterpillar 24H
- Caterpillar 24M
The fitment information is based on the listed Caterpillar applications for shaft number 3071965. The AUTOGRADER designation is retained as provided in the application data, while 16M, 24H, and 24M are listed as specific Caterpillar machine models. No additional machine models are included because they are not specified in the available product information.
Cross-reference numbers
- 3071965
- 307-1965
Number 3071965 is the primary identification used for this pivot shaft. The format 307-1965 is an alternate written format for the same listed part number. These numbers are provided for catalog and parts-identification purposes; verify the number against the equipment parts documentation before fitting the shaft.
Specifications
| Part type | Pivot shaft |
| SKU | 3071965 |
| Equipment manufacturer | Caterpillar |
| Part status | New aftermarket spare part |
| Part manufacturer | CTP (Costex Tractor Parts) |
| Listed machine application | AUTOGRADER |
| Listed machine model | 16M |
| Listed machine model | 24H |
| Listed machine model | 24M |
| Weight | 46.4 lb |
| Length | 61 cm |
| Width | 20 cm |
| Depth | 20 cm |
The stated dimensions are 61 cm in length, 20 cm in width, and 20 cm in depth. The listed weight is 46.4 lb. The available data does not specify the shaft diameter, material, machining tolerances, thread details, surface treatment, or included installation hardware, so these parameters are not stated here.
This description covers the part identification, listed Caterpillar applications, cross-reference formats, and available dimensional data for pivot shaft 3071965. Additional compatibility should be established from the machine serial number and the equipment parts catalogue where the application is not explicitly listed.

























Questions 3071965 Pivot Shaft fit Caterpillar 0 questions