5J8156 Snap-in Wiper Seal fit Caterpillar
5J8156 Snap-in Wiper Seal fit Caterpillar
- New aftermarket part
- 30 day returns
- Manufacturer's warranty
Characteristics 5J8156 Snap-in Wiper Seal fit Caterpillar
5J8156 Snap-in Wiper Seal for Caterpillar Equipment
The 5J8156 snap-in wiper seal is a rod wiper seal used in Caterpillar equipment hydraulic applications. It is designed to help prevent external contaminants from entering the system and is intended for applications with less severe operating conditions and lower hydraulic pressure than applications using a pressed-in wiper seal. This is a new aftermarket spare part manufactured by CTP (Costex Tractor Parts).
The seal has a snap-in installation form and is identified as a REG-type seal. The supplied part is the wiper seal only; no additional components or installation hardware are specified in the available product data.
Fitment
The part is listed for the following Caterpillar equipment types and models:
- Autograder 24H
- Backhoe loaders: 416, 416B, 416C, 416D, 416E, 416F, 420E, 420F, 424D, 426, 428, 428B, 428C, 428D, 432D, 438B, 438C, 438D and 442D
- Engineering Obstruction Vehicle: 30/30 Deuce
- Cold millers: PR-1000 and PR-1000C
Fitment should be checked against the equipment model, serial number and the dimensions of the installed seal position before installation.
Cross-reference numbers
- 5J8156
- 5J-8156
These numbers identify the same wiper seal part reference in different formatting. The Caterpillar equipment manufacturer is associated with the listed reference number; the supplied part is manufactured by CTP.
Specifications
| Part type | Snap-in wiper rod seal |
| Seal form | REG type |
| Application | Hydraulic rod wiper seal |
| Installation type | Snap-in |
| Outer diameter, H | 3.00 in, tolerance ±0.003 in |
| Inner diameter | 2.50 in |
| Width, A | 0.25 in, tolerance ±0.02 in |
| Base thickness, C | 2.83 in, tolerance ±0.010 in |
| Approximate weight | 0.1 lb |
| Length | 8.89 cm |
| Width | 15.24 cm |
| Depth | 1.27 cm |
The outer diameter, inner diameter, width and base thickness are the dimensional parameters provided for identification of this seal. The stated tolerances apply to the dimensions for which they are specified. The seal is used at the rod opening to remove external contamination from the rod surface before it enters the hydraulic system.
Questions 5J8156 Snap-in Wiper Seal fit Caterpillar 0 questions