2011161 Spacer for Caterpillar Wheel Loaders

2011161 is a steel spacer for Caterpillar wheel loaders. The part is identified by SKU 2011161 and is also referenced as 201-1161. This is a new aftermarket spare part manufactured by CTP (Costex Tractor Parts).

The spacer belongs to the space plate category and has a center hole with a slot-type configuration. Its center hole is non-threaded. The dimensions and weight listed below apply to the supplied spacer identified by part number 2011161.

Fitment

The spacer is used on the following Caterpillar wheel loader models and series:

• Caterpillar 980G wheel loader
• Caterpillar 980G II wheel loader
• Caterpillar 980H wheel loader
• Caterpillar 980K wheel loader
• Caterpillar 980K HLG wheel loader
• Caterpillar 980M wheel loader
• Caterpillar 980L wheel loader

The listed applications are Caterpillar 980-series wheel loaders. Model designation and machine configuration should be checked against the part number before installation.

Cross-reference numbers

• 2011161
• 201-1161

2011161 is the product SKU used for this spacer. The number 201-1161 is the corresponding hyphenated part-number format shown for the same component.

Specifications

The spacer has a 1.574-inch outside diameter, a 0.866-inch inside diameter and a 1.322-inch length. The center opening is non-threaded, so the part is specified as a spacer with a center hole-slot design rather than a threaded component.

For part identification, use the 2011161 or 201-1161 number together with the Caterpillar machine model. The listed dimensions are provided in both inch and centimeter units where available; the dimensional values should be considered together when checking the component against the removed part and the machine assembly.