2M6910 Recoil Spring fit Caterpillar
2M6910 Recoil Spring fit Caterpillar
- New aftermarket part
- 30 day returns
- Manufacturer's warranty
2M6910 Recoil Spring (Outer) for Caterpillar Equipment
The 2M6910 is an outer recoil spring used in Caterpillar tracked bulldozers and pipelayers. This is a new aftermarket spare part manufactured by CTP (Costex Tractor Parts).
The supplied application data identifies this part for Caterpillar equipment models D9G, D9H, 594, and 594H. The component is listed as a recoil spring with a zinc-rich coating and an outer position within the recoil spring assembly.
Fitment
| Equipment manufacturer | Caterpillar |
| Equipment type | Tracked bulldozer |
| Compatible model | D9G |
| Compatible model | D9H |
| Equipment type | Pipelayer |
| Compatible model | 594 |
| Compatible model | 594H |
The listed models indicate the equipment applications provided for this part number. Compatibility should be verified against the machine model and serial-number range before installation, because equipment configurations may vary.
Cross-reference numbers
| Caterpillar equipment part number | 2M6910 |
| Hyphenated part-number format | 2M-6910 |
| Interchange identification | 2M6910 |
Part number 2M6910 is also written in the hyphenated format 2M-6910. These number formats refer to the same listed recoil spring identification.
Specifications
| Part type | Recoil spring |
| Position | Outer |
| Coating | Zinc-rich coated |
| Length | 8 cm |
| Width | 8 cm |
| Depth | 24 cm |
| Weight | 2.5 lb |
| SKU | 2M6910 |
The dimensions are recorded in the supplied data as length, width, and depth respectively. The part is described as an outer spring, so its position should be matched with the recoil spring arrangement installed on the Caterpillar machine.
Questions 2M6910 Recoil Spring fit Caterpillar 0 questions