4S6137 Studs - Taper Lock fit Caterpillar
4S6137 Studs - Taper Lock fit Caterpillar
- New aftermarket part
- 30 day returns
- Manufacturer's warranty
4S6137 Studs - Taper Lock for Caterpillar
4S6137 is a taper-lock stud used with Caterpillar equipment, including articulated dump trucks, Challenger machines, and the listed Caterpillar models. The part is a new aftermarket spare part manufactured by CTP (Costex Tractor Parts).
The stud has a clamp-cone configuration with a threaded section for installation in a threaded hole. The supplied data identifies the part for applications requiring a 3/8-16 thread and a total length of approximately 3.19 inches.
Fitment
- Caterpillar articulated dump trucks
- Caterpillar Challenger series equipment
- Caterpillar 735
- Caterpillar 740
- Caterpillar D350E
- Caterpillar D350E II
- Caterpillar D400E
- Caterpillar D400E II
- Caterpillar 65E
- Caterpillar 75E
The listed application data identifies the part for the Caterpillar equipment models and machine series shown above. Compatibility should be checked against the machine serial number and the part number installed on the equipment before assembly.
Cross-reference numbers
- 4S-6137 — hyphenated part-number format
The product SKU is 4S6137. The number 4S-6137 is the same part-number designation written with a separator.
Specifications
| Part type | Stud |
| Stud configuration | Taper lock |
| Stud type | Clamp cone |
| Material | Steel |
| Material temperature rating | High-temperature steel, maximum 500 °C |
| Thread size | 3/8-16 inch |
| Threads per inch | 16 |
| Thread type | Standard coarse thread |
| Hole thread pitch | 16 |
| Thread and locking configuration | Dimensions and tolerances are specified for straight, tapered, and locking threads |
| Finish | Plain finish |
| Screw length A | 3 3/16 in |
| Overall length | 3.19 in |
| Overall length, metric value | 9 cm |
| Width | 1 cm |
| Depth | 1 cm |
| Weight | 0.1 lb |
Questions 4S6137 Studs - Taper Lock fit Caterpillar 0 questions