6V1426 Studs - Taper Lock for Caterpillar Equipment

6V1426 is a taper-lock stud used as a threaded fastening component on Caterpillar equipment. The part has a clamp-cone design, a coarse 3/8-16 thread and a plain surface finish. This is a new aftermarket spare part manufactured by CTP (Costex Tractor Parts).

The stud is identified in the product data as a Caterpillar taper-lock stud. The available information specifies the equipment brand and the part design, but does not provide a list of individual Caterpillar machine models or machine series. Exact model compatibility should therefore be checked against the equipment parts catalogue and the dimensions of the installed stud.

Specifications

The listed 3/8-16 designation indicates a nominal thread diameter of 3/8 inch and 16 threads per inch. The coarse-thread specification describes the thread pitch used on the stud. The taper-lock and clamp-cone designations identify the locking geometry of the fastening component rather than a separate accessory or supplied mounting kit.

The stated dimensions are an overall length of 2.76 inches, equivalent to approximately 7 cm, with a listed width and depth of 1 cm each. The product data gives a weight of 0.68 lb. No nuts, washers, sleeves or other installation hardware are specified as included with the stud.

The available product data does not identify additional Caterpillar manufacturer numbers, supplier cross-reference numbers or exact machine-model applications for SKU 6V1426. Accordingly, no cross-reference list or model-specific fitment list is included.