Switch Assembly 1496371 for Caterpillar Equipment

Switch assembly with SKU 1496371 is used on Caterpillar equipment, including Caterpillar backhoe loaders and paving compactors. This is a new aftermarket spare part manufactured by CTP (Costex Tractor Parts).

The part is identified as a switch assembly and is listed for Caterpillar 420E and 430E backhoe loader models, as well as CP and CS paving compactor models. The supplied electrical configuration includes a 2-pin DT connector and an attached wire section.

Fitment

The switch assembly is listed for the following Caterpillar equipment models and series:

• Caterpillar 420E backhoe loader
• Caterpillar 430E backhoe loader
• Caterpillar CP-56 paving compactor
• Caterpillar CP-64 paving compactor
• Caterpillar CP-74 paving compactor
• Caterpillar CP-76 paving compactor
• Caterpillar CS-56 paving compactor
• Caterpillar CS-64 paving compactor
• Caterpillar CS-74 paving compactor
• Caterpillar CS-76 paving compactor

Compatibility is specified for the listed Caterpillar models. Before installation, the part number, connector configuration, and physical dimensions should be checked against the switch being replaced and the machine parts documentation.

Cross-reference numbers

Numbers 1496371 and 149-6371 refer to the same identified part number in different writing formats.

Specifications

The electrical and dimensional data describe the listed configuration of the 1496371 switch assembly: a 2-pin DT connection, 0.56-inch hex size, 7.87-inch wire length, and a temperature range from -40 °F to 250 °F. The recorded physical dimensions are 7.5 cm in length, 4.3 cm in width, and 7.7 cm in depth.