1861525 Solenoid Valve fit Caterpillar
1861525 Solenoid Valve fit Caterpillar
- New aftermarket part
- 30 day returns
- Manufacturer's warranty
Solenoid Valve 1861525
Solenoid valve assembly for Caterpillar equipment, including tracked bulldozers and autograders. The valve is a 24 VDC, normally closed, 3-way, 2-position unit with a 2-pin connector and a 3/4-16 thread. This is a new aftermarket spare part manufactured by CTP (Costex Tractor Parts).
Fitment
Part number 1861525 is used on the following Caterpillar equipment and models:
- Tracked bulldozers
- Caterpillar D8R tracked bulldozer
- Autograders
- Caterpillar 12H motor grader
- Caterpillar 120H motor grader
- Caterpillar 120H NA motor grader
- Caterpillar 12H NA motor grader
- Caterpillar 135H motor grader
- Caterpillar 135H NA motor grader
- Caterpillar 140H motor grader
- Caterpillar 140H NA motor grader
- Caterpillar 143H motor grader
- Caterpillar 160H motor grader
- Caterpillar 160H NA motor grader
- Caterpillar 163H NA motor grader
Fitment should be confirmed by comparing the equipment model and the valve identification number before installation. The listed applications include both the general machine series and the specified model variations marked NA.
Cross-reference numbers
The valve is identified by the following corresponding part-number formats:
| Part number without separator | 1861525 |
| Part number with separator | 186-1525 |
Numbers 1861525 and 186-1525 refer to the same valve identification used for the listed Caterpillar applications.
Specifications
| Part type | Solenoid valve assembly |
| Equipment brand | Caterpillar |
| Electrical voltage | 24 VDC |
| Valve state | Normally closed |
| Valve configuration | 3-way, 2-position |
| Electrical connector | 2-pin |
| Thread size | 3/4-16 |
| Specified fluid | SAE 10 to SAE 30 oil |
| Weight | 0.6 lb |
| Length | 9.3 cm |
| Width | 4 cm |
| Depth | 9.3 cm |
Questions 1861525 Solenoid Valve fit Caterpillar 0 questions