1208402 Water Pump for Caterpillar Equipment

Water pump for Caterpillar equipment, including asphalt pavers, cold planers, engine-machine applications, engineer support tractors, and industrial engines. This is a new aftermarket spare part manufactured by CTP (Costex Tractor Parts).

Fitment

The water pump is listed for the following Caterpillar equipment models and machine series:

• AP-755 asphalt paver
• PM-102 cold planer
• 3126 engine and machine applications
• C7 engine applications
• 30/30 equipment
• DEUCE equipment
• 3126B engine applications
• C-9 engine applications
• SPP101 equipment

The supplied fitment data associates this part with Caterpillar equipment in several application groups. These include Caterpillar asphalt pavers, Caterpillar cold planers, Caterpillar engine-machine configurations, Caterpillar engineer support tractors, and Caterpillar industrial engine applications.

Model references in the available application data include both complete machine designations and engine series. The 3126 series appears in the listing as well as the related 3126B designation. The C7 and C-9 references identify additional Caterpillar engine applications, while AP-755 and PM-102 identify the listed paving and cold-planing machines.

Cross-reference numbers

The water pump is identified by the following Caterpillar and aftermarket cross-reference numbers:

• 1208402
• 0R1013
• 0R8093
• 3522157
• OR1013
• OR8093

Number 1208402 is the SKU and primary part number for this water pump. The references 0R1013, 0R8093, 3522157, OR1013, and OR8093 are listed as interchangeable or associated numbers for the same application. The letter “O” and the numeral “0” are retained as shown in the supplied part-number data.

Before installation, the number on the removed pump and the machine or engine identification should be checked against the listed references and fitment. The available data confirms the application groups and model designations above but does not provide additional engine serial-number ranges or installation-specific restrictions.

Specifications

The stated dimensions are 35 cm in length, 25 cm in width, and 20 cm in depth. The listed weight is 16.8 lb. No further information is provided for the pump material, pulley configuration, shaft dimensions, gasket or seal contents, mounting hardware, thread specifications, or rotation direction.